Miele W 4449 WPS LiquidWash, Operating Instructions Manual

Page: 76 / 80

Standby
To save energy, the display goes out
and the indicator light for the
Start/
Stop
button will start flashing slowly.
The display will always go out,
– if a programme is not selected within
10 minutes of the machine being
switched on.
– 10 minutes after the end of a
programme.
Pressing one of the buttons switches
the display back on again.
You can also choose whether you want
the display to go out 10 minutes after a
programme has started or to remain
visible throughout the programme.
On
The standby function is switched on.
When this option is selected, the
display will go out 10 minutes after a
programme has started.
Not in current programme
(the machine is delivered with this
option selected as standard)
The standby function is switched off.
The display will remain visible during a
programme.
A tick
L
will appear beside the option
to show that it has been set.
Memory
If an extra option has been selected
for a programme, Automatic
dispensing has been selected, or the
recommended temperature or spin
speed has been altered, the machine
will store the changes in memory at
the start of a programme.
When this programme is chosen again
these settings will appear in the display.
The machine is delivered with the
memory function deactivated.
A tick
L
will appear beside the option
to show that it has been set.
To close the Settings menu
Settings
Back A
Continue OK
^
Press the right hand
Menu
button
under OK .
Settings menu
76