Miele W 4449 WPS LiquidWash, Operating Instructions Manual

Page: 13 / 80

Preparing the washing
machine
Before using the machine for the first
time ensure that it is correctly
installed and connected. See
"Installation and connection". Also
check that the drain filter is securely
tightened to prevent the risk of water
leaks during use.
^
Press the
I-On/0-Off
button in.
If the washing machine is being
switched on for the first time, the
welcome screen will appear.
The welcome screen will appear in the
display every time the machine is
switched on until a programme lasting
longer than 1 hour has been
completed.
The display for setting the language will
then appear.
Setting the language
You will be asked to select the
language you require for the display. It
is possible to change the language at
any time via the
Settings
menu.
Sprache
deutsch
) OK
^
If the language shown is not the one
you want, select the language you do
want by pressing the left hand
Menu
button under
)
. Confirm your
selection by pressing the right hand
Menu button under OK .
Setting the time of day
The display for setting the time will then
appear.
12 :00
Change OK
^
Select the hours you want by
pressing the left hand
Menu
button
under Change , and confirm this with
the right hand Menu button under
OK .
^
Then set and confirm the minutes.
Reminder to remove transport struts
To avoid the risk of damage, the
transport struts must be removed
before the machine is used for the
first time. See "Installation and
connection" for instructions on how
to do this.
^
After removing the transport struts (if
this has not already been done by
your fitter) press the right hand
Menu
button under OK .
Reminder to remove the dispensing
unit
^
Open the door and remove the
dispensing unit (liquid detergent
container).
^
Confirm that you have removed the
dispensing unit by pressing the right
hand
Menu
button under OK .
Before using for the first time
13