background image

Detergent dosage

If you change the brand of liquid
detergent for the automatic dispensing
system you will also need to alter the
dosage level set for it.

See "Liquid detergent dispensing -
Dosage level" for more information.

Gentle action

Activating gentle action reduces the
drum action and is suitable for
washing slightly soiled items more
gently. It should be activated for
garments with a single bar under the
care label and for articles which feel
too hard after they have been dried.

Gentle action can be activated for the

Cottons

and the

Minimum iron

programmes.

The machine is delivered with the
Gentle action setting deactivated.

A tick

L

will appear beside the option

to show that it has been set.

Longer pre-wash

The pre-wash for the

Cottons

programme can be extended by 6, 9
or 12 minutes.

The default setting for the pre-wash is
25 minutes.

If you require a longer pre-wash, this
can be extended.

A tick

L

will appear beside the option

to show that it has been set.

Suds cooling

When this is activated, additional
water flows into the drum at the end
of the main wash to cool the suds
down. Hot suds can damage plastic
drainage pipes.

Suds cooling takes place when
temperatures of 95°C and 75°C are
selected.

Suds cooling should be activated:

– to prevent the danger of scalding if

the drain hose is hooked over the
edge of a sink or basin.

– where the drainage pipes do not

comply with DIN 1986.

The machine is delivered with Suds
cooling deactivated.

A tick

L

will appear beside the option

to show that it has been set.

Settings menu

73

Summary of Contents for W 4449 WPS LiquidWash

















































































Reviews: