Miele W 3985 WPS Operating Instructions Manual Download Page 69

Page: 69 / 80

Temperature

You can chose for the temperature to
be displayed in

°C/Celsius

°F/Fahrenheit

Buzzer

When the buzzer function has been
activated, an audible tone sounds at
the end of a programme or when
Rinse hold is reached.

There are three different options:

Off

(the machine is delivered with this
option selected as standard)

The buzzer is switched off but sounds
at maximum volume if there is a fault.

Normal

The buzzer sounds at the end of a
programme or when Rinse hold is
reached.

Loud

The buzzer sounds at maximum volume
at the end of a programme or when
Rinse hold is reached.

Keypad tones

An audible tone sounds when the

Start

button, a short cut button or the

multi-function selector is operated.

The machine is delivered with the
keypad tone switched off.

Display contrast

There are ten different display
contrast settings.

The machine is delivered with the
display contrast on Setting 5.

This will change as soon as a different
setting is chosen.

Settings menu

Summary of Contents for W 3985 WPS

















































































Search results

Summary of Contents for W 3985 WPS

Reviews:

Related manuals for W 3985 WPS

Brands by name

Popular brands

Miele W 3985 WPS, Operating Instructions Manual

Search results

Summary of Contents for W 3985 WPS

Reviews:

Related manuals for W 3985 WPS

Brands by name

Popular brands