Problems with the load size indicator
Problem
Possible cause
Remedy
The display
indicates a load of
< 25%
even though
the drum is full.
There was already
laundry in the drum
when the washing
machine was switched
on. This has
decalibrated the
sensor from the zero
setting.
^
To recalibrate the sensor to the
zero setting:
– Remove the laundry from the
drum and leave the door
open.
– Switch off the washing
machine.
– Switch on the washing
machine.
– Press short cut button
1
. The
main menu for the
Cottons
programme appears.
– Press short cut button
1
Detergent
in until the display
shows:
Zero setting OK.
The display
indicates a load of
25%
,
50%
,
75%
or
100%
when the
drum is empty
The load size sensor
has been decalibrated
from the zero position.
Rotate the drum once. If the
display still indicates a load of
25%
,
50%
,
75%
or
100%
,
recalibrate the sensor to zero
again (see above section).
Problem solving guide
42
Summary of Contents for W 3985 WPS
Page 77: ...77 ...
Page 78: ...78 ...
Page 79: ...79 ...
Page 80: ...Alteration rights reserved 3909 W 3985 WPS M Nr 07 590 080 01 ...
