Miele W 3985 WPS Operating Instructions Manual Download Page 36

Page: 36 / 80

The right amount to dispense will
depend on the following:

– The quantity of the laundry

– The soiling level of the laundry

Lightly soiled
No visible dirt or stains. Possibly
slight body odour.

Normally soiled
Visibly dirty and/or just a few slight
stains.

Heavily soiled
Stains and soiling clearly visible.

– The water hardness level.

Check with your local water supplier
if you do not know the hardness level
in your area.

Water softener

A water softener can be used to cut
down on the use of detergents in hard
water areas. Dispense according to the
amount specified on the packaging.
First add detergent and then the water
softener.

Miele branded water softening tablets
are available from the Miele Spare Parts
Department or via the internet on
www.miele-shop.com.

Use a quantity of detergent as for soft
water.

Miele do not recommend connecting
the machine to a household water
softener.

Washing with several
components

If you wash using several components
(e.g. special application detergents),
we recommend always dispensing the
agents into compartment

in the

following order:

1. Detergent

2. Water softener

3. Stain remover

This way the agents are distributed
more evenly.

Detergent

Summary of Contents for W 3985 WPS

















































































Search results

Summary of Contents for W 3985 WPS

Reviews:

Related manuals for W 3985 WPS

Brands by name

Popular brands

Miele W 3985 WPS, Operating Instructions Manual

Search results

Summary of Contents for W 3985 WPS

Reviews:

Related manuals for W 3985 WPS

Brands by name

Popular brands