Miele W 3985 WPS Operating Instructions Manual Download Page 27

Page: 27 / 80

Shirts

cold to 60°C

Max. load 2.0 kg

Notes

– Pre-treat collars and cuffs if necessary.

– Wash silk garments in the

Silks

programme.

Extra options Short, Water plus, Rinse hold

Denim

cold to 60°C

Max. load 3.0 kg

Notes

– Wash denim inside out.

– Denim often contains excess dye and will run during the first

few washes. Wash light and dark coloured items separately.

Extra options Short, Pre-wash or Soak, Rinse hold

Express

cold to 40°C

Max. load 3.0 kg

Item

Small loads of items which require freshening up and which can
be washed in a

Cottons

programme.

Extra options Water plus, Rinse hold

Woollens

/ac

cold to 40°C

Max. load 2.0 kg

Fabric

Machine-washable or hand-washable wool or wool blend fabrics.
If the care label does not specify a temperature, wash using the
cold setting.

Extra option

Rinse hold

Silks

cold to 30°C

Max. load 1.0 kg

Fabric

Silks and other handwashable fabrics with no wool content, e.g.
satin, lace and silk.

Note

Place tights, bras etc. in a washing bag.

Extra options Water plus, Rinse hold

Programme chart

Summary of Contents for W 3985 WPS

















































































Search results

Summary of Contents for W 3985 WPS

Reviews:

Related manuals for W 3985 WPS

Brands by name

Popular brands

Miele W 3985 WPS, Operating Instructions Manual

Search results

Summary of Contents for W 3985 WPS

Reviews:

Related manuals for W 3985 WPS

Brands by name

Popular brands