What to do, if . . .
With the help of the following notes, minor faults in the performance of the
appliance, some of which may result from incorrect operation, can be put right
without contacting the Service Department.
,
Repair work to electrical appliances should only be carried out by a
suitably qualified person in accordance with local and national safety
regulations. Repairs and other work by unqualified persons could be
dangerous. The manufacturer cannot be held liable for unauthorised work.
The programme does not start
Problem
Possible cause
Remedy
The display remains
dark and the
programme selector is
not lit up.
There is no power to
the machine.
Check whether
–
the mains plug is plugged
in and switched on.
–
the fuse or circuit breaker
has tripped.
The display shows:
Machine locked.
Enter code.
The electronic system
lock has been
activated.
Enter the code for the system
lock and confirm the entry.
Deactivate the system lock if
you do not wish this message
to appear in the display the
next time the machine is
switched on.
The programme does
not start when Drain/
Spin has been
selected.
The washing machine
has not been prepared
for using for the first
time.
Prepare the machine as
described in "Before using for
the first time".
The display is dark.
The display has
switched off
automatically to save
energy (Stand-by
mode).
Press a button. Stand-by
comes to an end.
Problem solving guide
38
Summary of Contents for W 2662 WPS
Page 62: ...62 ...
Page 71: ...71 ...
Page 72: ...Alteration rights reserved 5104 W 2662 M Nr 06 068 860 02 en GB ...
