Stand-by
To save energy, the display goes out
after 10 minutes and the
Start/Stop
T
will start flashing slowly.
There are two options:
On
Stand-by comes on:
– if a programme is not selected after
the machine has been switched on.
– after a programme has started.
– at the end of a programme.
Not in current Prog. (the machine is
delivered with this option selected)
Stand-by comes on:
– if a programme is not selected after
the machine has been switched on.
– at the end of a programme.
Pressing one of the buttons switches
the display back on again.
A tick will appear beside the option to
show that it has been set.
C
Back
A
Q
On
Not in current prog.
B
^
Select the option you want and
confirm your selection.
Memory
If an Extra has been selected for a
programme, or the recommended
spin speed has been altered, the
machine will store the changes in
memory at the start of a programme.
When this programme is chosen again
these settings will appear in the display.
The washing machine is delivered with
the memory function deactivated.
A tick will appear beside the option to
show that it has been set.
C
Back
A
V
Off
B
On
^
Select the option you want and
confirm your selection.
To close the Settings menu
C
Back
A
LANGUAGE
F
...
TIME OF DAY ...
H
^
Select
Back
and confirm your
selection.
Settings menu
J
70
Summary of Contents for W 2662 WPS
Page 62: ...62 ...
Page 71: ...71 ...
Page 72: ...Alteration rights reserved 5104 W 2662 M Nr 06 068 860 02 en GB ...
