Miele W 2662 WPS, Operating Instructions Manual

Page: 20 / 72

Final spin speed
Wash programme rpm
Cottons 1800
Minimum Iron 900
Delicates 600
Automatic 900
Quick wash 1600
Woollens 1200
Silks 400
Denim 900
Shirts 600
Outer wear 800
Spin 1800
Separate rinse 1200
Starch 1500
You can reduce the final spin speed.
You cannot select a final spin speed
higher than that shown in the chart
above.
Rinse and interim spin
There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the
interim spin speed. If a spin speed of
less than 700 rpm is selected in a
Cottons programme, an additional rinse
is introduced.
To omit the final spin (Rinse hold)
^
Select the Rinse hold setting. The
laundry will not be spun and will
remain suspended in the final rinse
water. This reduces creasing if the
laundry is not going to be removed
from the drum immediately after the
end of the programme.
– To start the final spin:
The washing machine will display the
maximum spin speed possible. You
can select a spin speed lower than
this. Start the final spin by pressing
the
Start/Stop
T
button.
– To end the programme:
Press the Door button. The water will
drain away. Press the Door button
again, to open the door.
To omit rinse and interim spin and
the final spin
^
Select the Without spin setting. The
laundry is not spun after the final
rinse. The water will drain away and
the machine will go straight into the
anti-crease stage. An additional rinse
is introduced if this setting is selected
with the
Cottons , Minimum iron , Auto-
matic and Quick wash programmes.
Spinning
20