Miele W 1945 Operating Instructions Manual Download Page 26

Page: 26 / 72

Programme chart

Automatic plus

7621

cold to 40°C

Max. load 5.0 kg

Use for

Mixed loads of garments suitable for the

Cottons

and

Minimum

iron

programmes. Sort according to colour.

Note

The wash parameters (e.g. water level, wash rhythm and spin
speed) are adjusted automatically in this programme to ensure the
best possible care and wash result for each item.

Dark garments / Denim

cold to 60°C

Max. load 3.0 kg

Use for

Black and dark garments made from cotton, mixed fibre or denim.

Notes

– Wash inside out.

– Denim often contains excess dye and may run during the first

few washes. Wash light and dark coloured items separately.

Spin

Notes

– To drain only: Select

(No spin).

– Make sure you select the appropriate spin speed.

* Please note that the "buckets" represent garment care label symbols. See

"Garment care label symbols".

Summary of Contents for W 1945









































































Search results

Summary of Contents for W 1945

Reviews:

Related manuals for W 1945

Brands by name

Popular brands

Miele W 1945, Operating Instructions Manual

Search results

Summary of Contents for W 1945

Reviews:

Related manuals for W 1945

Brands by name

Popular brands