Miele W 1945 Operating Instructions Manual Download Page 25

Page: 25 / 72

Programme chart

Intensive plus

cold to 95°C

Max. load 7.0 kg

Use for

Mixed loads of heavily soiled garments suitable for the

Cottons

and

Minimum iron

programmes. Sort according to colour.

Notes

– The pre-wash additional function will be activated automatically.

– The duration of the main wash will be longer.

Separate rinse/Starch

Max. load 7.0 kg

Use for

– Rinsing handwashed items.

– Starching table cloths, serviettes and workwear.

Notes

– Use a low spin speed for items which crease easily.

– Items for starching should be freshly laundered but not treated

with fabric conditioner.

Express 20

cold to 40°C

Max. load 3.5 kg

Use for

Cotton and minimum iron garments that have hardly been worn or
are only very lightly soiled.

Note

The Short extra option will be activated automatically.

Shirts

cold to 60°C

Max. load 2.0 kg

Notes

– Pre-treat collars and cuffs if necessary.

– Wash silk shirts and blouses in the

Delicates

programme.

Summary of Contents for W 1945









































































Search results

Summary of Contents for W 1945

Reviews:

Related manuals for W 1945

Brands by name

Popular brands

Miele W 1945, Operating Instructions Manual

Search results

Summary of Contents for W 1945

Reviews:

Related manuals for W 1945

Brands by name

Popular brands