Miele W 1945 Operating Instructions Manual Download Page 24

Page: 24 / 72

Please refer to the separate booklet for information on programmes available as
additional programme packages.

Programme chart

Cottons

9ö8E76

cold to 95°C

Max. load 7.0 kg

Use for

Cotton, linen and mixed fibre fabrics, e.g. table linen, towelling,
underwear, T-shirts etc.

Note for test institutes:

Short programme: 3.5 kg load and

Short

extra option

Minimum iron

43218E76

cold to 60°C

Max. load 3.5 kg

Use for

Synthetic, mixed fibre and easy care cotton. If fabrics have a high
proportion of man-made fibres it is advisable to programme the
machine for "Gentle action". See "Programmable functions".

Note

Reduce the spin speed for fabrics which crease easily.

Delicates

4321ac

cold to 60°C

Max. load 2.5 kg

Use for

Delicate garments made of synthetic fibre, mixed fibre, rayon and
easy care cotton.

Note

Select

(No spin) for items which crease easily.

Woollens

/ac

cold to 40°C

Max. load 2.0 kg

Use for

Machine-washable or hand-washable wool or wool blend fabrics.
If the care label does not specify a temperature, wash using the
cold setting.

Note

Reduce the spin speed for items which crease easily.

Summary of Contents for W 1945









































































Search results

Summary of Contents for W 1945

Reviews:

Related manuals for W 1945

Brands by name

Popular brands

Miele W 1945, Operating Instructions Manual

Search results

Summary of Contents for W 1945

Reviews:

Related manuals for W 1945

Brands by name

Popular brands