4. Remove the laundry
26
End of programme/Anti-crease
At the end of the programme:
will
light up in the display and the
Start/
Stop
button will go out. The anti-crease
function, if selected, will then switch on
for a maximum of 2 hours.
10 minutes after the end of the
programme the
Start/Stop
button will
begin to flash slowly and the display will
go out: this is Standby mode to save
energy.
The dryer will switch off automatically
15 minutes after the end of the anti-
crease phase (with programmes without
an anti-crease phase it will switch off 15
minutes after the end of the
programme).
Remove the laundry
Never
open the door before the
drying process has finished.
Reach under the door grip and pull
the door open.
Remove the laundry.
Check that all items have been
removed from the drum.
If items are left in the dryer, they
could be damaged by overdrying
when the dryer is next used.
If the dryer is switched on at the mains
and the door is opened, the drum
lighting will come on. It will go out a few
minutes later to save energy.
If the dryer is still switched on, switch
it off with the
button.
A buzzer will sound.
Remove the fluff from the 2 fluff filters
in the door opening: see "Cleaning
and care - Fluff filters".
Shut the door with a gentle swing.
Empty the condensed water
container.
