Miele TKB 550 WP Operating Instructions Manual Download Page 25

Page: 25 / 72

3. Select a programme and start it

Select any options or delay
start (if required)

Please see "Options" for further
information.

To select options



Press a button.

The button will light up when the option
is selected.

Delay start

You can delay the start of the
programme.

However:

delay start cannot be used

with the

Warm air

programme.



Touch the



sensor.

–



will flash

Please see "Delay start" for more
information.

Start the programme



Press the flashing

Start/Stop

button.

The

Start/Stop

button will now light up

constantly.

The

Perfect Dry

indicator will only flash/

light up with programmes with
selectable drying levels (see also
"Operating the tumble dryer").

The laundry will be cooled down shortly
before the end of the programme.

Summary of Contents for TKB 550 WP









































































Search results

Summary of Contents for TKB 550 WP

Reviews:

Related manuals for TKB 550 WP

Brands by name

Popular brands

Miele TKB 550 WP, Operating Instructions Manual

Search results

Summary of Contents for TKB 550 WP

Reviews:

Related manuals for TKB 550 WP

Brands by name

Popular brands