Problem solving guide
45
Problem
Possible cause and remedy
lights up at the end
of a programme
There is a build-up of fluff in the airways.
Clean the fluff filters.
Clean the plinth filter.
See "Cleaning and care".
To switch off
:
Open and close the door while the dryer is
switched on.
and
light up after
a programme is
cancelled
An excessive amount of fluff has built up.
Clean the fluff filters.
Clean the plinth filter.
Clean the airways:
Clean the area underneath the plinth filter.
Clean the heat exchanger.
To switch off
:
Switch the dryer off and back on again.
lights up after a
programme is cancelled
The condensed water container is full or there is a
kink in the drain hose.
Empty out the condensed water container.
Check the drain hose.
To switch off
:
Open and close the door while the dryer is
switched on.
lights up
The programme selector has been moved.
Select the original programme. The time remaining
will appear in the display again.
Bars flash in the display
at the end of a
programme:
...
...
...
The programme has finished but the laundry has not
yet cooled down.
Either remove the laundry and spread it out to cool
down or leave it in the tumble dryer to cool down
during the cooling phase.
