Problem solving guide
44
Problem solving guide
With the help of the following notes minor faults in the performance of the
appliance, some of which may result from incorrect operation, can be put right
without contacting Miele.
Please note that a call-out charge will be applied to service visits where the
problem could have been rectified as described in these operating instructions.
Repair work to electrical appliances should only be carried out by an
authorised Miele service technician. Repairs and other work by unqualified
persons could be dangerous. Miele cannot be held liable for unauthorised
work.
Check indicators and fault messages
Problem
Possible cause and remedy
The programme is
cancelled,
lights up
This is not a fault.
In some programmes, if the drum has been
underloaded or is empty, the programme will be
cancelled. This can also happen if the items are
already dry.
Open and close the door to resume drying.
Use the
Warm air
programme (timed drying) to dry
individual items.
flashes/lights up
after the tumble dryer is
switched on and a
programme cannot be
selected
Access via a code has been activated.
See "Programmable functions -
Code".
and
(e.g.
)
light up after a
programme is cancelled
There is no obvious cause.
Switch the dryer off and then on again.
Start a programme.
If the programme is cancelled again and an error
message appears, there is a fault. Contact Miele.
