Miele TKB 350 WP Operating Instructions Manual Download Page 38

Page: 38 / 76

Cleaning and care

Replacing the plinth filter



Fit the filter back on the handle. Make

sure it is the correct way round.

To ensure that the filter is positioned

correctly in the front of the heat

exchanger unit:



First insert the handle with the plinth

filter attached over the two guide

pins.

– The word Miele on the handle must

be the correct way up.



Push the plinth filter in completely.

The act of pushing in the plinth filter will

also push in the right-hand guide pin.



Close the heat exchanger access

panel.



The dryer can only be operated

with the plinth filter fitted correctly

and the heat exchanger access

panel closed. The access panel must

be closed correctly to ensure that

water cannot leak from the

condenser system and to ensure that

the dryer functions efficiently.

Summary of Contents for TKB 350 WP













































































Search results

Summary of Contents for TKB 350 WP

Reviews:

Related manuals for TKB 350 WP

Brands by name

Popular brands

Miele TKB 350 WP, Operating Instructions Manual

Search results

Summary of Contents for TKB 350 WP

Reviews:

Related manuals for TKB 350 WP

Brands by name

Popular brands