Technical Information
T300 Series Clothes Dryer (Condenser)
5.4.2
Heater Bank - Removal from Machine Nos. Prefix 10/… or 11/…
Figure 5-8:
Heater Bank Removal (from Machine Nos. Prefix 10/… or 11/…)
1. Carry out steps 1-3 of Section 5.4.1 – Heater Bank Removal (Machine
Nos. without a Prefix).
2. Remove the two screws, refer to Figure 5-8 – Heater Bank Removal,
Item 1, and take off the heater cover.
3. Disconnect the wiring.
4. Turn the retaining screws, refer to Figure 5-8 – Heater Bank Removal,
Item 2, one turn to release the heater bank and remove it by pulling
upwards.
5.5
Heater Bank Thermostat
5.5.1
Replacement
1. Carry out the procedures described in Sections 5.4.1 or 5.4.2
depending on the type of the heater bank.
2. Change the thermostat.
Note:
Until the following Machine nos., if one thermostat should fail, all units
must have both thermostats replaced and wired according to Conversion
Instruction 12-7.7:
T 368 C – Machine no. 7633263
T 369 C – Machine no. 7632736
T 377 C – Machine no. 7650601
T 378 C – Machine no. 7642779
29
