Miele PW 6055 Plus Operating And Installation Instructions Download Page 73

Page: 73 / 76

No. of programmes

You can extend the number of
programmes available.

0 additional programmes (the machine
is delivered with this option selected).

4 additional programmes (

Table linen

Pillows

Curtains

and

Kitchen linen

2 additional programmes (

Outerwear

and

Proofing

6 additional programmes (all the above
named programmes).

Quick wash

The

Quick wash

programme can be

activated or deactivated.

The machine is delivered with the

Quick

wash

programme activated.

Hygiene

The option to start the

Hygiene

programme appears in the display
when a programme which uses a
temperature of less than 55°C is
selected.

The machine is delivered with this
option deactivated.

Sluice

This option activates the additional
sluice programmes.

The machine is delivered with this
option activated.

Disinfection

You can add special disinfection
programmes.

0 additional programmes (the machine
is delivered with this option selected).

4 additional programmes (thermal
disinfection 15 min/85°C,
chemo-thermal disinfection 10 min/
70°C, chemo-thermal disinfection
20 min/60°C and chemo-thermal
disinfection 30 min/40°C).

Pre-wash

You can choose for pre-wash to be
carried out with every

Cottons

and

Minimum iron

programme or to select

it on an individual basis via the Extras
menu.

The machine is delivered with the
option to select the pre-wash from the
Menu activated.

Settings/Supervisor level menu

Summary of Contents for PW 6055 Plus













































































Search results

Summary of Contents for PW 6055 Plus

Reviews:

Related manuals for PW 6055 Plus

Brands by name

Popular brands

Miele PW 6055 Plus, Operating And Installation Instructions

Search results

Summary of Contents for PW 6055 Plus

Reviews:

Related manuals for PW 6055 Plus

Brands by name

Popular brands