Miele PW 6055 Plus Operating And Installation Instructions Download Page 69

Page: 69 / 76

Language

The display can be set to appear in
one of several different languages.

You can set the language you want as
the fixed default language in the

Languages

sub-menu.

If the language shown is not the one
you want turn the multi-function
selector to highlight the one that you
do want and confirm your selection.

Sort languages

You can select the order that you
want the languages available to
appear in in the display if you have
first selected the

International

International, 4 langs.

option from the

Language menu

in the Settings

menu.

Supervisor level

You can alter the access code to the
supervisor level.

Enter the old code.

Enter a new code.

After you have confirmed the new
code, the display will change to the
beginning of the

Settings

menu.

Language menu

You can select whether you want the
welcome screen asking for a
language to be selected to appear
again after the end of a washing
programme and before the entry
menu.

There are three options:

– National: The welcome screen does

not appear (default setting).

– International: The welcome screen

will appear and the language must
then be selected. Any available
language can be selected. Follow
the

Sort languages

setting.

– International, 4 langs.: The welcome

screen will appear and the language
must then be selected. One of four
languages can be selected. Follow
the

Sort languages

setting.

Settings/Supervisor level menu

Summary of Contents for PW 6055 Plus













































































Search results

Summary of Contents for PW 6055 Plus

Reviews:

Related manuals for PW 6055 Plus

Brands by name

Popular brands

Miele PW 6055 Plus, Operating And Installation Instructions

Search results

Summary of Contents for PW 6055 Plus

Reviews:

Related manuals for PW 6055 Plus

Brands by name

Popular brands