Miele PW 6055 Plus Operating And Installation Instructions Download Page 66

Page: 66 / 76

Display contrast / Brightness

There are ten different display
contrast and brightness settings.

The display contrast / brightness will
change as soon as a different setting is
chosen.

Confirm your selection with the
multi-function selector.

Standby

To save energy, the display goes out
after 10 minutes and the

Start

button

flashes slowly.

Operating the multi-function selector or
one of the short cut buttons switches
the display back on again.

There are three options:

Standby comes on:

– if a programme is not selected within

10 minutes of the machine being
switched on.

– 10 minutes after a programme has

started.

– 10 minutes after the end of a

programme.

Not in current prog. (the machine is
delivered with this option selected)

Standby comes on:

– if a programme is not selected within

10 minutes of the machine being
switched on.

Off

The display remains on all the time.

Memory

If an extra option has been selected
for a programme, or the
recommended temperature or spin
speed has been altered, the machine
will store the changes in memory at
the start of a programme.

The next time this programme is
selected these settings will appear in
the

Programme selection

menu.

The memory function is not active when
favourite programmes are selected
using the short cut buttons.

The machine is delivered with the
memory function deactivated.

Temperature unit

You can chose for the temperature to
be displayed as

°C/Celsius

(default

setting) or

°F/Fahrenheit

The machine is delivered with the

°C

option selected.

Settings menu

Summary of Contents for PW 6055 Plus













































































Search results

Summary of Contents for PW 6055 Plus

Reviews:

Related manuals for PW 6055 Plus

Brands by name

Popular brands

Miele PW 6055 Plus, Operating And Installation Instructions

Search results

Summary of Contents for PW 6055 Plus

Reviews:

Related manuals for PW 6055 Plus

Brands by name

Popular brands