Miele PW 6055 Plus Operating And Installation Instructions Download Page 26

Page: 26 / 76

Denim cold to 40°C

Max. load 3.5 kg

Tip

–

Wash denim inside out.

–

Denim often contains excess dye and will run during the first
few washes. Wash light and dark coloured items separately.

Extra option

Rinse hold

Detergent

Liquid detergent for coloured fabrics

Towelling 60°C to 95°C

Max. load 5.5 kg

Tip

For dark coloured fabrics use a detergent for coloured fabrics.

Extra option

Rinse hold

Detergent

Powder detergent, detergent for coloured fabrics, liquid
detergent.

Separate rinse

Max. load 6.5 kg

Fabric type

Articles which have been washed by hand and only need to be
rinsed and spun in the machine.

Extra option

Rinse hold

Starch

Max. load 6.5 kg

Tip

The laundry (table cloths, napkins, overalls) should be washed
but not treated with fabric conditioner.

Extra option

Rinse hold

Starching
agent

Liquid starch, starch formulations, viscous liquid starch, starch

Drain

For draining water from the machine.

Spinning

Max. load 6.5 kg

For spinning fabrics. Please make sure you select the appropriate spin speed.

Programme chart

Summary of Contents for PW 6055 Plus













































































Search results

Summary of Contents for PW 6055 Plus

Reviews:

Related manuals for PW 6055 Plus

Brands by name

Popular brands

Miele PW 6055 Plus, Operating And Installation Instructions

Search results

Summary of Contents for PW 6055 Plus

Reviews:

Related manuals for PW 6055 Plus

Brands by name

Popular brands