Miele PW 6055 Plus Operating And Installation Instructions Download Page 71

Page: 71 / 76

Pre-wash water

You can choose for the pre-wash to
be carried out with either hot or cold
water (not available with the

Curtains

programme). Hot water can only be
only taken in if the wash temperature
is above 30°C.

The machine is delivered with the

Hot

water option selected.

Main wash water

You can choose for the main wash to
be carried out with either hot or cold
water (not available with the

Woollens

Silks

Curtains

and

Proofing

programmes). Hot water can

only be only taken in if the wash
temperature is above 30°C.

The machine is delivered with the

Hot

water option selected.

If the machine is not connected to
the hot water supply, the programme
durations will be longer and will vary
from the time remaining shown in the
display.

The machine will need to be set up
specifically for

Recycled water

if this

option is selected.

Rinse water

You can choose for the rinses in the

Cottons

Minimum iron

Kitchen linen

Towelling

and

Sluice

programmes to

be carried out with either hot or cold
water. Hot water can only be only
taken in if the wash temperature is
above 50°C.

The machine is delivered with the

Hot

water option selected.

The machine will need to be set up
specifically for

Recycled water

if this

option is selected.

Low water pressure

This setting can be activated to
ensure problem free water intake
where the water pressure is
constantly low (below 100 kPa).

The machine is delivered with this
option deactivated.

Settings/Supervisor level menu

Summary of Contents for PW 6055 Plus













































































Search results

Summary of Contents for PW 6055 Plus

Reviews:

Related manuals for PW 6055 Plus

Brands by name

Popular brands

Miele PW 6055 Plus, Operating And Installation Instructions

Search results

Summary of Contents for PW 6055 Plus

Reviews:

Related manuals for PW 6055 Plus

Brands by name

Popular brands