Miele PW 5065 Operating And Installation Instructions Download Page 26

Page: 26 / 76

Bed linen

40°C to 60°C

Max. load 6.5 kg

Use for

Cotton and mixed fibre bed linen.

Note

For dark coloured fabrics use a detergent for coloureds.

Additional option Pre-wash

Detergent

Universal detergent or detergent for coloured fabric

Curtains

Cold to 40°C

Max. load 3.0 kg

Use for

Curtains, including net curtains, specified as
machine-washable by the manufacturer.

Note

Select

Without spin

for curtains which crease easily.

Additional option Pre-wash

Detergent

All purpose powder detergent, powder detergent for coloured
fabrics.

Cottons Eco

Max. load 6.5 kg

Use for

Normally soiled cotton garments

Notes

– These settings are the most efficient in terms of energy and

water consumption for washing cottons.

– With

the actual wash temperature reached will be

lower than 60°C although the wash performance is the same
as with the standard Cottons 60°C programme.

Extras

Pre-wash

Detergent

Universal detergent or detergent for coloured fabric

Note for test institutes:

Test programme in accordance with EN 60456 and Energy label in accordance
with EU Guideline 1061/2010

Woollens

Cold to 30°C

Max. load 2.5 kg

Use for

Machine-washable or hand-washable wool or wool blend
fabrics.

Detergent

Liquid detergent for machine-washable woollens

Drain / Spin

Max. load 6.5 kg

Notes

Drain only: Select

Without spin

For spinning textiles. Please make sure you select the
appropriate spin speed.

Programme chart

Summary of Contents for PW 5065













































































Search results

Summary of Contents for PW 5065

Reviews:

Related manuals for PW 5065

Brands by name

Popular brands

Miele PW 5065, Operating And Installation Instructions

Search results

Summary of Contents for PW 5065

Reviews:

Related manuals for PW 5065

Brands by name

Popular brands