Miele PW 5065, Operating And Installation Instructions

Page: 22 / 76

E
Start the programme
The Start button will flash as soon as a
programme can be started.
^
Press the Start button.
The Start button will now light up.
The drum lighting switches off once the
programme has started.
If delay start has not been selected, the
estimated programme duration will
appear in the display. This will count
down in one minute steps. During the
first 10 minutes the machine measures
how much water is being absorbed by
the laundry. The programme duration
may be shorter depending on this
absorbency rate.
The programme sequence is also
shown in the display. The machine lets
you know which section of the
programme has been reached.
F
Unload the drum
If the laundry is not removed immedi-
ately the programme has finished, the
anti-crease phase will begin and the
drum will turn at intervals to help
prevent creasing.
The machine will switch off
automatically 15 minutes after the
end of the anti-crease phase. You will
need to press the
K
button to switch
it back on again.
^
Press the Door button to open the
drum door.
^
Remove the laundry.
Check that all items have been
removed from the drum. Items left in
the drum could discolour other items
in the next wash or become
discoloured themselves.
^
Check the folds in the door seal for
any small articles, e.g. buttons, which
might be lodged there.
^
Turn the programme selector to
Finish .
^
Close the drum door. Otherwise there
is the danger of objects being placed
inadvertently in the drum. If these
remained unnoticed and were
washed in the next load, they could
damage the laundry.
^
Switch the machine off with the
K
button.
Short instructions
22