Miele PW 5065 Operating And Installation Instructions Download Page 27

Page: 27 / 76

Special programmes

The list of special programmes varies depending on the setting (see "Settings
menu - List of special programmes").

Quick wash

20°C to 60°C

Max. load 3.5 kg

Use for

Very lightly soiled fabrics which can be washed in a

Cottons

programme.

Detergent

Universal detergent or detergent for coloured fabric

Shirts

20°C to 60°C

Max. load 2.5 kg

Use for

Shirts and blouses.

Note

– Pre-treat collars and cuffs if necessary.

Detergent

Universal detergent or detergent for coloured fabric

Starch

Max. load 3.5 kg

Note

The laundry (table cloths, napkins, workwear) should be
washed but not treated with fabric conditioner.

Starching
agent

Liquid starch, powder starch formulations

Pillows

30°C to 95°C

2 pillows (40 x 80 cm)

or 1 pillow (80 x 80 cm)

Use for

Pillows with feather, down or synthetic fillings.

Notes

– Please observe the instructions on the wash care label.

– Use a liquid detergent.

Detergent

Universal detergent or detergent for coloured fabric

Outerwear

Cold to 40°C

Max. load 3.0 kg

Use for

Microfibre outerwear such as Gore-Tex

, SYMPATEX

WINDSTOPPER

etc.

Notes

– Zip up jackets before washing.

– Do not use fabric conditioner.

Detergent

Liquid detergent for delicates

Programme chart

Summary of Contents for PW 5065













































































Search results

Summary of Contents for PW 5065

Reviews:

Related manuals for PW 5065

Brands by name

Popular brands

Miele PW 5065, Operating And Installation Instructions

Search results

Summary of Contents for PW 5065

Reviews:

Related manuals for PW 5065

Brands by name

Popular brands