The wash programme stops and a fault indicator light comes
on.
Fault indicator
Possible cause
Remedy
A
The Check drain light
flashes.
The water outlet is
blocked.
Clean the fluff (drain)
filter and drain pump.
The drain hose has been
fixed too high.
The maximum drain
height is 1 m.
The Check inlet light
flashes.
The water inlet is blocked. Open the stopcock.
The filter in the water inlet
hose is dirty.
Clean the filter.
The Check inlet and
Check drain lights flash.
The water protection
system has reacted.
Call the Service
Department.
The Soak/Pre-wash or
Rinses indicator light
flashes in the
programme sequence.
There is a fault.
Start the programme
again.
If the fault indicators
occur again, contact the
Service Department.
A
To switch off the fault indicator: Switch off the machine with the
I-On/0-Off
button
and turn the programme selector to
Finish
Problem solving guide
37
Summary of Contents for Premier 300
Page 58: ...58 ...
Page 59: ...Programmable functions for changing standard settings ...
Page 66: ...66 ...
Page 67: ...67 ...
