Miele Premier 300 Operating Instructions Manual Download Page 62

Page: 62 / 68

Gentle action

Activating gentle action reduces the
drum action. Slightly soiled items are
washed more gently. It should be
activated for garments with a single
bar under the care label and for
articles which feel too hard after they
have been dried.

Gentle action can be used with the

Cottons

Quick wash

Starch

and

Mixed

wash

programmes.

If "Gentle action" is programmed into
the machine, every wash cycle in these
programmes will be carried out with
gentle action rhythm.

The washing machine is delivered with
"Gentle action" de-activated.

Follow steps

to programme

and store in memory.

Before you begin, first ensure that:

– The washing machine is switched off.

– The machine is properly closed.

– The programme selector is at

Finish

Press the

Start

button and keep it

pressed in whilst carrying out steps

Switch the machine on with the

I-On/0-Off

button.

Wait until the

Start

indicator light

comes on . . .

. . . and then release the

Start

button.

Turn the programme selector to the

Cottons 60°C

position:

If the

Soak/Pre-wash

sequence

indicator light:

does not flash

= Gentle action

has not been
activated

flashes

= Gentle action

has been activated

Press the

Start

button to activate or

deactivate the Gentle action option.

Switch the washing machine off with
the

I-On/0-Off

button.

The setting you have selected is now
stored in memory and will remain so
until you alter it.

Programmable functions

Summary of Contents for Premier 300





































































Search results

Summary of Contents for Premier 300

Reviews:

Related manuals for Premier 300

Brands by name

Popular brands

Miele Premier 300, Operating Instructions Manual

Search results

Summary of Contents for Premier 300

Reviews:

Related manuals for Premier 300

Brands by name

Popular brands