General problems or an unsatisfactory wash result
Problem
Possible cause
Remedy
The machine shakes
during the spin cycle.
The four feet are not
resting evenly on the
floor.
Level the machine. See
advice on installation.
The laundry has not
been spun
satisfactorily.
The spin speed selected
was too low.
Select a higher spin speed
next time.
The pump makes
strange noises.
These do not indicate a fault. They occur at the end of
a pump sequence as a normal part of the operation.
Large residues of
detergent remain in
the dispenser drawer.
The water supply
pressure is too low.
–
Clean the filter in the wa-
ter inlet system.
–
It may be useful to press
the
Water plus
button.
Washing powder used
with water softener
tends to become sticky.
Pour washing powder into
the dispenser before adding
any water softener.
Fabric conditioner is
not completely
dispensed or too
much water remains in
the
§
compartment.
The siphon is either
incorrectly positioned or
clogged.
Clean the siphon, see
"Cleaning and care -
Cleaning the detergent
drawer".
Problem solving guide
39
Summary of Contents for Premier 300
Page 58: ...58 ...
Page 59: ...Programmable functions for changing standard settings ...
Page 66: ...66 ...
Page 67: ...67 ...
