Miele Premier 300 Operating Instructions Manual Download Page 16

Page: 16 / 68

Programme chart

Cottons

9ö876

Fabric

Cottons and linen fabrics, e.g. bed linen, table linen,
towelling, jeans, underwear, T-shirts, nappies.

Additional options

Short, Pre-wash, Soak, Water plus

Notes

–

Only use the

Cottons 95°C

programme for heavily soiled

and incontinent laundry.

–

For heavily soiled laundry and/or soiling which has been
left unwashed for some time, select the

Soak

additional

option.

–

For laundry with large amounts of dirt (e.g. dust, sand)
use the

Pre-wash

additional option.

–

For lightly soiled laundry select the

Short

additional

option.

–

For dark coloured fabrics use a detergent for coloured
fabrics, or liquid detergent.

Detergent

Powder detergent, detergent for coloured fabrics, liquid
detergent, tablet detergent and liquid tab detergent. See
also "Detergent" section.

Max. load

5 kg

Note for test institutes:
Programme setting for testing according to EN 60456 standard:

Cottons 60°C

Minimum iron

4321 876

Fabric

For garments made of synthetic fibres, mixed fibres and for
easy care cotton shirts and blouses.

Additional options

Short, Pre-wash, Soak, Water plus

Notes

–

For heavily soiled laundry and/or soiling which has been
left unwashed for some time, select the

Soak

additional

option.

Detergent

Powder detergent, detergent for coloured fabrics, liquid
detergent, detergent for delicates. See also "Detergent"
section.

Max. load

2.5 kg

How to wash correctly

Summary of Contents for Premier 300





































































Search results

Summary of Contents for Premier 300

Reviews:

Related manuals for Premier 300

Brands by name

Popular brands

Miele Premier 300, Operating Instructions Manual

Search results

Summary of Contents for Premier 300

Reviews:

Related manuals for Premier 300

Brands by name

Popular brands