Warning and Safety instructions
17
Chlorous cleaning agents can damage the elastomers of the
machine.
If chlorous cleaning agents have to be used, a maximum temperature
of 70 °C in the "Main wash" programme blocks is recommended (see
programme chart).
Chlorous cleaning agents must not be used in machines supplied (ex
works) with special oil-resistant elastomers for oil and grease
applications.
Abrasive substances must not be placed in the machine as they
could cause damage to the mechanical components of the water
supply. Any residues of abrasive substances on items to be washed
must be removed without trace before reprocessing in the machine.
Pre-treatments with cleaning or disinfecting agents can create
foam, as can certain types of soiling and chemical agents. Foam can
have an adverse effect on the cleaning and disinfection result.
Processes must be set up such that foam cannot escape from the
wash cabinet. It would hinder the correct functioning of the machine.
The process used must be monitored on a regular basis by the
supervisor to check foaming levels.
To avoid the risk of damage to the machine and any accessories
used with it caused by chemical agents, soiling and any reaction
between the two please read the notes in "Chemical processes and
technology".
Where a chemical agent is recommended on technical application
grounds (e.g. a cleaning agent), this does not imply that the
manufacturer of the machine accepts liability for the effect of the
chemical on the items being cleaned.
Please be aware that changes in formulation, storage conditions etc.
which may not be publicised by the chemical manufacturer, can have
a negative effect on the cleaning result.
When using a chemical agent it is essential that the manufacturer's
instructions are followed. The chemical agent must only be used for
the application it is designed for and in the situation specified, to
avoid material damage and such dangers as a severe explosive
chemical reaction (e.g. an explosive oxyhydrogen gas reaction).
Always follow the relevant manufacturer's instructions on storage
and disposal of chemical agents.
In critical applications where very stringent requirements have to
be met, it is strongly recommended that all the relevant factors for the
process, such as chemical agents, water quality etc. are discussed
with the Miele Application Technology specialists.
