Problem solving guide
140
Spray arm monitoring/wash pressure
Problem
Cause and remedy
Spray arm monitoring - upper
spray arm: Spray arm blocked
or excessive foaming
or
Spray arm monitoring - lower
spray arm: Spray arm blocked
or excessive foaming
or
Spray arm monitoring - mobile
unit spray arm 1 - : spray arm
blocked or excessive foaming
The rotation speed set has not been reached.
- Items are obstructing the machine or basket spray arms.
Arrange the load so that the spray arms can turn easily
and start the programme again.
- The relevant spray arm is blocked.
Clean the spray arm.
Check whether the filters in the wash cabinet are clean
and correctly inserted.
Start the programme again.
- Wash pressure is too low due to a heavy build-up of foam.
Follow the instructions regarding foam build-up in
"Chemical processes and technology".
Start the
Rinsing
programme in order to clean the wash
cabinet.
Then reprocess the load again.
Spray pressure exceeds
tolerance
The wash pressure differs from the reference value.
Possible causes of fluctuations in the wash pressure
include:
- Defective water connections,
- Open adapters,
- Foam build-up.
Identify and resolve the cause of this.
The programme is not interrupted. Nevertheless, you
must reprocess the load.
Excessive spray pressure
fluctuation
A programme was interrupted because of severe
fluctuations in the wash pressure.
Possible causes of fluctuations in the wash pressure
include:
- Defective water connections,
- Open adapters,
- Foam build-up.
Identify and resolve the cause of this.
Reprocess the load again.
