Miele PG 8130 U Operating Instructions Manual Download Page 81

Page: 81 / 92

Settings menu

Rinse aid

You can adjust the rinse aid dosage for
best results.
The dispenser can be set between 0
and 6 ml.
3 ml is set as factory default.

The rinse aid dosage can turn out to be
higher than the set value due to the
automatic adjustment of the program.

If spots appear on dishes and
glassware:

– Increase the rinse aid dosage.

If clouding or smearing appears on
dishes and glassware:

– Decrease the rinse aid dosage.



Select the setting you want and
confirm your choice with

External dispensing

Activate automatic dispensing of liquid
detergent if you have installed the
optional external dosing module.

The DOS module comes with a
separate installation manual.



Select the setting you want and
confirm with

The setting will remain active until
you deactivate “External dispensing”.

When using liquid dispensing via an
external DOS module, you can
dispense the detergent according to the
detergent manufacturer's instructions
as a percentage or in millilitres per
minute

Detergent quantity

The following functions will only
become visible when external
dispensing has been activated.

A detergent amount of 0.50 % is set as
standard. The dispensed quantity can
be modified between 0.1 and 2.00 % in
increments of 0.05 %.

Summary of Contents for PG 8130 U





























































































Search results

Summary of Contents for PG 8130 U

Reviews:

Related manuals for PG 8130 U

Brands by name

Popular brands

Miele PG 8130 U, Operating Instructions Manual

Search results

Summary of Contents for PG 8130 U

Reviews:

Related manuals for PG 8130 U

Brands by name

Popular brands