Miele PG 8130 U Operating Instructions Manual Download Page 25

Page: 25 / 92

Commissioning



Add rinse aid only until it is visible in
the opening.

The rinse aid reservoir holds approx.
110 ml (3.7 oz.).



Close the flap firmly so that it clicks
into place. Otherwise water can enter
the rinse aid reservoir during a
program.



Wipe up any spilled rinse aid. This
prevents over-foaming occurring
during the next program.

You can adjust the rinse aid dosage
for best results (see “Settings menu,
Rinse aid”).

Rinse aid indicator

When the



Refill rinse aid

message

appears in the display, the reservoir
contains sufficient rinse aid for 2 – 3
programs only.



Fill the reservoir with commercial
rinse aid.



Confirm with

The refill indicator will go out.

If you do not want the salt and rinse
aid indicators to appear, you can
switch off both refill indicators for salt
and rinse aid (see “Settings menu,
Switching off the refill indicators”).

Summary of Contents for PG 8130 U





























































































Search results

Summary of Contents for PG 8130 U

Reviews:

Related manuals for PG 8130 U

Brands by name

Popular brands

Miele PG 8130 U, Operating Instructions Manual

Search results

Summary of Contents for PG 8130 U

Reviews:

Related manuals for PG 8130 U

Brands by name

Popular brands