Miele PG 8130 U Operating Instructions Manual Download Page 20

Page: 20 / 92

Commissioning

Basic settings



Turn the dishwasher on with the



button.

The welcome screen will appear when
the dishwasher is turned on for the first
time.

Language

The display will change automatically to
the screen for setting the language.



Use the



arrow buttons to select

the language you want and also the
country, if appropriate, and confirm
your selection with

See “Display functions” for more
information about the display and
controls.

A check



will appear next to the

language that has been set.

Time of day

The display will then change to the
screen for setting the time.

The current time of day must be set
before you can use the “FlexiTimer”
programming option.
You can also show the current date and
time in the display.



Use the



arrow buttons to set the

hour and confirm with



Then set the minutes and confirm
with

Keeping the



arrow buttons

pressed will increase or decrease the
time automatically.

The display will then change to the
screen for setting the clock display.



Select whether or not the time of day
should appear in the display and
confirm your selection with



If you have selected

DisplayOn

confirm the message about higher
energy consumption with

Summary of Contents for PG 8130 U





























































































Search results

Summary of Contents for PG 8130 U

Reviews:

Related manuals for PG 8130 U

Brands by name

Popular brands

Miele PG 8130 U, Operating Instructions Manual

Search results

Summary of Contents for PG 8130 U

Reviews:

Related manuals for PG 8130 U

Brands by name

Popular brands