Miele PG 8050i, Installation Instructions Manual

Page: 16 / 20

6. Adjusting the door springs
^
Open the dishwasher door halfway.
If the door remains in this position when
released, the springs are adjusted
correctly.
If the door drops, the tension on the
springs needs to be increased.
If it closes on its own, the tension on the
springs needs to be decreased.
The adjusting screw is located behind
the door in the upper front strip, on the
left hand side of the dishwasher.
Please note:
If the door front is too heavy for the
door springs (i.e. the door falls open),
then stronger springs should be fitted.
Please contact your Miele dealer or the
Miele Service Department for advice.
^
Open the dishwasher door halfway.
The door springs are easier to adjust
when the door is only half open.
^
To adjust the door springs use a T20
Torx or a small slotted screwdriver
and turn the screw:
-
clockwise to increase the tension
- counterclockwise to decrease
the tension.
Installation
16