![background image](http://html.mh-extra.com/html/miele/pg-8050i/pg-8050i_installation-instructions-manual_234952012.webp)
^
Hang the bracket on the machine
door.
^
Slide the top edge of the templates
under the spacer bars and control
panel.
^
Slide the mounting bracket up or
down until the oblong holes on the
machine door align with the
corresponding marks on the template
(as shown in the left side of inset
a
^
Draw a line on each template that is
even with the top edge of the
adjacent cabinet door (inset
b
).
^
Remove the bracket from the door.
^
Place the door panel on a flat
surface, good side facing down,
taking care not to scratch the
surface. Make certain that the bottom
of the panel is closest to you.
^
Place the bracket on the back of the
door panel and adjust it so that:
– the lines drawn on the templates
align with the upper edge of the door
panel and;
– the mounting bracket is centered (left
to right) on the door panel.
Installation
12
Summary of Contents for PG 8050i
Page 18: ...18 ...
Page 19: ...19 ...
Page 20: ...M Nr 07 865 040 01 Alteration rights reserved Publication date 08 24 2010 ...