Miele PG 8050i, Installation Instructions Manual

Page: 11 / 20

4. Fitting the front panel
Mounting brackets are already fitted on
stainless steel door fronts. These fronts
cannot be shortened. (Go to "Fitting
and securing the door front".)
The door of a kitchen base unit (without
drawer front or fittings) is normally used
for the front panel.
If a kitchen door front is not available, a
panel with the following dimensions
may be used:
Width:
23 1/4" - 23 1/2"
(590 - 597 mm)
Thickness:
the same thickness as the adjacent
front panels, but at least 2/3" (16 mm).
Height:
Dimension
X
Fitting the mounting bracket
A mounting bracket must be fitted to
the rear of the front panel.
Templates are provided to position the
mounting bracket and the front panel
correctly.
^
Place a template on each end of the
bracket as shown, making sure the
rule marks face the outside of the
bracket.
Installation
11