![background image](http://html.mh-extra.com/html/miele/pg-8050i/pg-8050i_installation-instructions-manual_234952010.webp)
3. Aligning the control panel
with the drawer fronts
^
The control panel can be aligned with
the drawer fronts of the kitchen
cabinets by adjusting the spacer
bars.
^
Using an 1/3" (8 mm) socket, turn the
nut clockwise or counterclockwise
until the spacers reach the required
height.
If necessary, individual (or all) spacer
bars can be removed.
^
To remove the spacer bars from the
control panel, place the panel on a
table, printed side up, and gently
push down on the spacer bars at a
point near the bottom of the control
panel. This will release the mounting
bolts from their slots.
Adjustment range
from 4 1/2" control panel with-
(112 mm):
out spacer bars,
to 5 3/4"
control panel with
(145 mm):
four spacer bars,
to 6"
using a fifth spacer bar
(154 mm):
(optional accessory).
After adjusting the control panel
height, cut off the plastic screw
excess.
Installation
10
Summary of Contents for PG 8050i
Page 18: ...18 ...
Page 19: ...19 ...
Page 20: ...M Nr 07 865 040 01 Alteration rights reserved Publication date 08 24 2010 ...