3. Selecting a program and starting it
26
Starting a program
Touch the flashing
Start/Stop
sensor
button.
The
Start/Stop
sensor button will light
up.
Notes
If a delay start time has been selected,
then this will count down on the time
display. At the end of the delay start
time or immediately after the program
has started (if no delay start time has
been selected), the program duration
will appear on the time display.
With a longer delay start time, the drum
will rotate occasionally to untangle the
laundry. This is not a fault.
- The
Perfect Dry
indicator will only
flash/light up with programs with
selectable drying levels (see also
“Operating the tumble dryer”).
- This dryer measures residual
moisture content in the laundry to
ensure perfect drying results.
However, if you load the dryer with
little or dry laundry, it will be dried/
aired for a set duration. In this case,
Perfect Dry
does not light up at the
end of the program.
Avoid overdrying items of
laundry and garments.
Otherwise they can wear out!
Energy savings
After 10 minutes, the indicators dim and
the
Start/Stop
sensor button starts
flashing.
Touch the
Start/Stop
sensor button to
switch the indicators on again (this
does not have any effect on a running
program).
- Before the program finishes, the
laundry is cooled.
