Miele MIWADREW201 Operating Instructions Manual Download

Page: 23 / 80

3. Selecting a program and starting it

Selecting a program

The tumble dryer is switched on when
you select a program and switched off
by turning the program selector to the



position.



Turn the program selector.

A drying level may light up and
durations will appear on the time
display.

Selecting drying levels during drying
level programs

Normal, Wrinkle-free, Delicates, Dress
Shirts, Express, Denims, Bed Linens,
Smoothing

The pre-set drying level can be
changed if required.



Touch the sensor button for the
drying level you want. It will then light
up brightly.

Any drying level can be selected for the

Normal, Express,

and

Bed Linens

programs. A more limited range is
available when using the other
programs.

Summary of Contents for MIWADREW201

















































































Search results

Summary of Contents for MIWADREW201

Reviews:

Related manuals for MIWADREW201

Brands by name

Popular brands

Miele MIWADREW201, Operating Instructions Manual

Search results

Summary of Contents for MIWADREW201

Reviews:

Related manuals for MIWADREW201

Brands by name

Popular brands