Miele MIWADREW201 Operating Instructions Manual Download

Page: 68 / 80

Installation

*INSTALLATION*

Refitting

7. Refit the door



Press the rubber seal back into the
groove on the door.



Position the door in front of the dryer.



Fit the base of the door hinge with its
2 pins into the openings on the dryer.

The base of the door hinge must be
flush with the front panel of the dryer.
The door cannot fall off in this position.



Screw the door securely to the dryer
at the base of door hinge





Now that you have changed the

door hinging, the door will open from
the opposite side.



Push the orange marker round to the
other side so that you will see at
which side to pull the door open.



Please keep the lock catch and

door hinge covers which were no
longer needed in a safe place. These
will be required if you choose to
change the door hinging back to its
original position.

Summary of Contents for MIWADREW201

















































































Search results

Summary of Contents for MIWADREW201

Reviews:

Related manuals for MIWADREW201

Brands by name

Popular brands

Miele MIWADREW201, Operating Instructions Manual

Search results

Summary of Contents for MIWADREW201

Reviews:

Related manuals for MIWADREW201

Brands by name

Popular brands