4. Removing the laundry at the end of the program
27
End of program/Anti-crease
End of program:
lights up and the
Start/Stop
sensor button goes out.
The dryer will switch off automatically. If
you want an Anti-crease phase after the
end of program, see “Programmable
functions“, “
Anti-crease”.
Energy savings
- 10 minutes after the end of the
program, the
Start/Stop
sensor
button will begin to flash and the
display will go out.
- The dryer will switch off automatically
15 minutes after the end of the Anti-
crease phase (with programs without
an Anti-crease phase, it will switch
off 15 minutes after the end of the
program).
Removing the laundry
Only open the door when the drying
process has finished. Otherwise, the
laundry will not be properly dried
through and cooled down.
Pull the door open at the side with
the orange marker.
Remove the laundry.
Items left in the dryer could be
damaged by over-drying when the
dryer is used the next time.
Always remove all items from the
drum.
Turn the program selector to the
position.
Remove the lint from the 2 lint filters
in the door opening: see “Cleaning
and care”, “Cleaning lint filters”.
Shut the door gently.
Empty the condensed water
container.
