Miele KWT 6834 SGS Operating And Installation Instructions Download

Page: 10 / 76

Warning and Safety instructions



Do not store explosive materials in the wine conditioning unit or

any products containing propellants (e.g. spray cans). Electrical
components could cause flammable vapours to ignite. Danger of fire
and explosion.



Do not operate any electrical equipment (e.g. an electric ice cream

maker) inside the wine conditioning unit. Danger of sparking and ex-
plosion.



Only use genuine original Miele accessories and spare parts with

this appliance. Using accessories or spare parts from other manu-
facturers will invalidate the warranty, and Miele cannot accept liabil-
ity.

Cleaning and care



Do not use any oils or grease on the door seals, as these will

cause the seals to deteriorate and become porous with time.



Do not use a steam cleaning appliance to clean this wine condi-

tioning unit.
The steam could reach electrical components and cause a short cir-
cuit.



Sharp edged or pointed objects will damage the evaporator, caus-

ing irreversible damage to the wine conditioning unit. Do not use
sharp edged or pointed objects to

– remove frost and ice,

– remove labels, stickers etc.

Transporting the appliance



Always transport the wine conditioning unit in an upright position

and in its original transport packaging to avoid damage in transit.



Danger of injury and damage. The wine conditioning unit is very

heavy and must be transported by two people.

Summary of Contents for KWT 6834 SGS













































































Search results

Summary of Contents for KWT 6834 SGS

Reviews:

Related manuals for KWT 6834 SGS

Brands by name

Popular brands

Miele KWT 6834 SGS, Operating And Installation Instructions

Search results

Summary of Contents for KWT 6834 SGS

Reviews:

Related manuals for KWT 6834 SGS

Brands by name

Popular brands