manualshive.com logo in svg

Miele KWT 6834 SGS, Operating And Installation Instructions

Share
Download
Miele KWT 6834 SGS Operating And Installation Instructions Download Page 39

SommelierSet

39

Inserting the bottle holder

You can store opened wine bottles in
bottle holder 

.

Remove the necessary number of
slats and place bottle holder 

 on

the wooden shelf.

Position dividers 

 in the bottle

holder to suit the size of bottles being
held. They should be held securely
and not rattle against each other.

Tip: 

For wine which has been opened

we recommend removing the oxygen
from the bottle as otherwise the wine
will lose its aroma and taste and spoil
more quickly. Special devices (e.g. a
wine pump with bottle stopper) create a
vacuum by extracting the air.

Attaching the accessory box

You can store accessories like a cork-
screw, foil cutter or chalk on, in, and
under the accessory box.

Hang accessory box 

 in the bottle

holder and cover with lid 

 if re-

quired.

Accessory box 

 can also be hung in

the middle of the wooden shelf. Re-
move the necessary number of slats
and put in the accessory box, so that
the box is supported on both sides
on the slats giving room for more
bottles in the bottle holder.

Summary of Contents for KWT 6834 SGS













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands