manualshive.com logo in svg

Miele KWT 6834 SGS, Operating And Installation Instructions

Share
Download
Miele KWT 6834 SGS Operating And Installation Instructions Download Page 45

Active AirClean filters

45

Fresh air from the room enters the wine
conditioning unit through the Active
AirClean filters. Filtering the incoming
air through the Active AirClean filters
ensures that all the air entering the ap-
pliance is fresh and free from dust and
odours.

The reminder to change the Active
AirClean filters will appear every 12
months at the latest.

When the Change Active AirClean filter
symbol 

 lights up in the display, the

Active AirClean filters in all three wine
conditioning zones need to be
changed.

Replacing the Active AirClean
filters

Turn the filter 90° clockwise or anti-
clockwise.

Pull the filter out.

Insert a new filter with the handle in
the vertical position.

Turn the filter 90 °C clockwise or anti-
clockwise until it clicks into place.

Active AirClean filters can be obtained
from your Miele dealer, Miele or via the
internet.

To confirm the filters have been
changed

Touch the settings sensor.

All symbols available for selection will
appear in the display and the 

 symbol

flashes.

Touch the sensors for setting the
temperature (

 or 

) repeatedly until

the 

 symbol flashes.

Touch the OK sensor to confirm your
selection.

The 

 will flash in the display (means:

Active AirClean filter is fitted in the ap-
pliance), the 

 symbol lights up.

Touch the symbols for setting the
temperature (

 or 

) repeatedly, until

the 

 symbol is displayed (means: the

counter has been reset).

Summary of Contents for KWT 6834 SGS













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands