Miele KWT 6321 UG Operating And Installation Instructions Download Page 16 | Manualshive

Page: 16 / 60

background image

Accessories

16

Accessories supplied

Active AirClean filter

The Active AirClean filter ensures op-
timum air quality in the wine condition-
ing unit by filtering the incoming air.

Air filter

The air filter behind the ventilation grille
protects the cooling system from dust.

Optional accessories

A range of useful Miele accessories and
care products are available for your
wine conditioning unit.

Multi-purpose microfibre cloth

The microfibre cloth is suitable for re-
moving fingerprints and light soiling
from surfaces such as stainless steel,
glass, plastic and chrome without the
use of chemicals.

MicroCloth Kit

The MicroCloth Kit contains a universal
cloth, a glass cloth and a polishing
cloth.
These cloths are extremely rip-proof
and hard-wearing. Thanks to very fine
microfibres these cloths achieve excel-
lent cleaning results.

Active AirClean filters

See “Accessories supplied”.

Accessories are available to order via
the Miele Webshop, from Miele dir-
ectly (see back cover for contact de-
tails) or from your Miele dealer.

«
...
14
15
16
17
18
...
»

Summary of Contents for KWT 6321 UG





























































Reviews:

No comments

Related manuals for KWT 6321 UG

Brand: Bottoms Up Beer Pages: 44

Brand: Bella Pages: 47

Brand: Springlane Pages: 44

Captain 1000 Series

Brand: U-Line Pages: 61

Brand: Hamilton Beach Pages: 32

Party Pan 61492

Brand: Ellrona Pages: 66

Brand: Bestron Pages: 28

Brand: ELICA Pages: 44

Brand: Waring Pages: 4

Brand: U-Line Pages: 75

Brand: Ninka Pages: 68

Brand: Anvil Pages: 1

Brand: Lattemento Pages: 21

Brand: Sunbeam Pages: 40

Brand: BRAYER Pages: 52

PLATINUM PRO BKS600

Brand: Bravetti Pages: 10

Brand: COFFEE PRO Pages: 32

Brand: Coffee crafters Pages: 49

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands