Miele KMDA 7774 Page 35 Operating And Installation Instructions Download

Page: 35 / 92

Operation

Keeping warm

This function is for keeping food warm
which has just been cooked and is still
hot. It is not for reheating food that
has gone cold.

The maximum duration for keeping food
warm is 2 hours.

– Keep food warm in the pan it was

cooked in and cover with a lid.

– You do not have to stir food while it is

being kept warm.

– Nutrients are lost when food is

cooked, and continue to diminish
when food is kept warm. The longer
food is kept warm for, the greater the
loss of nutrients. Try to ensure that
food is kept warm for as short a time
as possible.

Activating/deactivating the keeping
warm function



Touch the



sensor for the cooking

zone you wish to use.

Summary of Contents for KMDA 7774





























































































Search results

Summary of Contents for KMDA 7774

Reviews:

Related manuals for KMDA 7774

Brands by name

Popular brands

Miele KMDA 7774, Operating And Installation Instructions

Search results

Summary of Contents for KMDA 7774

Reviews:

Related manuals for KMDA 7774

Brands by name

Popular brands