manualshive.com logo in svg

Miele KMDA 7774, Operating And Installation Instructions, Page: 41 / 92

Share
Download
Miele KMDA 7774 Operating And Installation Instructions Download Page 41

Safety features

41

System lock / Safety lock

The system lock and safety lock are
deactivated if there is an interruption
to the power supply.

Your hob is equipped with a system
lock and a safety lock to prevent the
hob and the cooking zones being
switched on or any settings being
altered.

The 

system lock

 is activated when the

hob is switched off. If the system lock is
activated, the hob cannot be switched
on and the timer cannot be used. A set
minute minder time continues to count
down. The hob is programmed so that
the system lock must be activated
manually. It can be programmed to be
activated automatically 5 minutes after
the hob has been switched off if the
system lock is not manually activated
first (see "Programming").

The 

safety lock

 is activated when the

hob is switched on. When activated, the
hob can be operated only under certain
conditions:

– The cooking zones, the cooker hood

and the hob can only be switched off.

– A set minute minder can be changed.

If an unavailable sensor is touched
whilst the system lock or safety lock is
activated 



 will appear in the timer

display for a few seconds and a tone
will sound.

Activating the system lock

Touch the 

 sensor for 6 seconds.

The time will count down in the timer
display. 



 will appear once the time

has elapsed. The system lock has been
activated.

Deactivating the system lock

Touch the 

 sensor for 6 seconds.



 will appear briefly in the timer

display and then the time will count
down. The lock function is deactivated
once the time has elapsed.

Summary of Contents for KMDA 7774





























































































Reviews:

No comments